Bearing Brokers Inc. https://bearingbrokersinc.com/ Proudly Rolling Integrity into Industry for 25 Years! Wed, 30 Nov 2016 19:37:46 +0000 en-US hourly 1 Roller and Engineered Chain for Paving Industry https://bearingbrokersinc.com/2016/11/30/roller-engineered-chain-paving-industry/ Wed, 30 Nov 2016 19:37:46 +0000 http://bearingbrokersinc.com/?p=996 We are pleased to announce that we now carry a complete line of roller chain, engineered chain and all the accessories specifically for the paving industry. We can supply riveted or heavy duty chain in a variety of different sizes. We can also supply the bearings, mounted units and hydraulic pumps for most mobile equipment, such […]

The post Roller and Engineered Chain for Paving Industry appeared first on Bearing Brokers Inc..

]]> We are pleased to announce that we now carry a complete line of roller chain, engineered chain and all the accessories specifically for the paving industry. We can supply riveted or heavy duty chain in a variety of different sizes. We can also supply the bearings, mounted units and hydraulic pumps for most mobile equipment, such as parking lot vacuum trucks, road sweepers, sand and salt spreaders, skid steers, pavers, motor graders, excavators, dozers and more.

Please be sure to call us for all of your chain and bearing needs if you are in the paving industry.

The post Roller and Engineered Chain for Paving Industry appeared first on Bearing Brokers Inc..

]]> Space – The Final Frontier for Bearings https://bearingbrokersinc.com/2016/03/02/space-the-final-frontier-for-bearings/ https://bearingbrokersinc.com/2016/03/02/space-the-final-frontier-for-bearings/#respond Wed, 02 Mar 2016 16:39:58 +0000 http://bearingbrokersinc.com/?p=686 They say it is cold in space, that is especially true for precision instrument bearings. INF was asked by an aerospace division of a major corporation to quote on a special bearing that would work in the subzero temperatures of space. The bearings were for slides that would hold a camera in a satellite. The […]

The post Space – The Final Frontier for Bearings appeared first on Bearing Brokers Inc..

]]> They say it is cold in space, that is especially true for precision instrument bearings. INF was asked by an aerospace division of a major corporation to quote on a special bearing that would work in the subzero temperatures of space. The bearings were for slides that would hold a camera in a satellite. The camera would move on a track and the bearings had to have a lubricant that would survive the rigors of space and continue working reliably.
We found the bearings and a manufacturer that cold provide the required bearing grease to meet their needs.
So no matter where you are, even orbiting the Earth, INF Bearing has the bearing solution that you need.

The post Space – The Final Frontier for Bearings appeared first on Bearing Brokers Inc..

]]> https://bearingbrokersinc.com/2016/03/02/space-the-final-frontier-for-bearings/feed/ 0 You never know where you will be when… https://bearingbrokersinc.com/2016/03/02/you-never-know-where-you-will-be-when/ Wed, 02 Mar 2016 16:25:04 +0000 http://bearingbrokersinc.com/?p=677 You never know where you will be when you need a bearing. You might be on a salmon fishing ship out at sea in the Bering Strait for example. You didn’t plan for your ship’s rudder bearing to go out, but it did. You can’t really make it back to port if you can’t steer […]

The post You never know where you will be when… appeared first on Bearing Brokers Inc..

]]> You never know where you will be when you need a bearing. You might be on a salmon fishing ship out at sea in the Bering Strait for example. You didn’t plan for your ship’s rudder bearing to go out, but it did. You can’t really make it back to port if you can’t steer your ship.

Going forward farther out to sea is not an option, and you can’t very well backup all the way to port, even if it was in the right direction. So what do you do?

Well if you are the ship’s captain you radio a ham radio operator, who takes down all of the size dimensions of the bad bearing unit and all the numbers you can find on the bearing. The ham radio operator then calls INF Bearing (Bearing Brokers sister company) to find the bearing.

We found the bearing (an RHP – MFC3.1/4) with an overseas supplier and had the bearing delivered via Next Day Air to an Alaskan repair facility, where the bearing was then placed on helicopter and flown out to the ship and delivered.

So no matter where you are in the world or what type of bearing you need INF Bearing can help.

The post You never know where you will be when… appeared first on Bearing Brokers Inc..

]]> CAM FOLLOWER BEARINGS https://bearingbrokersinc.com/2016/01/09/cam-follower-bearings/ Sun, 10 Jan 2016 01:53:56 +0000 http://bearingbrokersinc.com/?p=356 Instead of an inner ring, cam followers have a solid stud (pin) that is threaded so that the cam follower can be quickly and easily attached to appropriate machine components by means of a hexagonal nut. A cam follower, also known as a track follower, is a specialized type of roller or needle bearing designed […]

The post CAM FOLLOWER BEARINGS appeared first on Bearing Brokers Inc..

]]> Instead of an inner ring, cam followers have a solid stud (pin) that is threaded so that the cam follower can be quickly and easily attached to appropriate machine components by means of a hexagonal nut.

A cam follower, also known as a track follower, is a specialized type of roller or needle bearing designed to follow cam lobe profiles. Cam followers come in a vast array of different configurations, however the most defining characteristic is how the cam follower mounts to its mating part; stud style cam followers use a stud while the yoke style has a hole through the middle.

The most common type uses needle rollers. This design can withstand high radial loads but no thrust loads. A similar design is the caged needle roller design, which also uses needle rollers, but uses a cage to keep them separated. This design allows for higher speeds but decreases the load capacity. Using a cage design was originated by RBC Bearings in 1971.

For heavy-duty applications a roller design can be used. This employs two rows of rollers of larger diameter than used in needle roller cam followers to increase the dynamic load capacity and provide some thrust capabilities. This design can support higher speeds than the full needle roller design.

INDUSTRIES

APPLICATIONS

MANUFACTURERS

The post CAM FOLLOWER BEARINGS appeared first on Bearing Brokers Inc..

]]> SELF ALIGNING BEARINGS https://bearingbrokersinc.com/2016/01/09/self-aligning-ball-bearings/ Sun, 10 Jan 2016 01:53:22 +0000 http://bearingbrokersinc.com/?p=354 Self-aligning ball bearings are double row, self-retaining units comprising solid outer rings with a concave raceway, inner rings with a cylindrical or tapered bore and ball and cage assemblies. The bearings are available in open and sealed versions. Constructed with the inner ring and ball assembly contained within an outer ring which has a spherical […]

The post SELF ALIGNING BEARINGS appeared first on Bearing Brokers Inc..

]]> Self-aligning ball bearings are double row, self-retaining units comprising solid outer rings with a concave raceway, inner rings with a cylindrical or tapered bore and ball and cage assemblies. The bearings are available in open and sealed versions.

Constructed with the inner ring and ball assembly contained within an outer ring which has a spherical raceway for self aligning this type of bearing is particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection.

This type is often used in conjunction with Plummer Block Housings in blowers, fans and belt conveyors.

INDUSTRIES

APPLICATIONS

  • Blowers
  • Belt Conveyors
  • Fans

MANUFACTURERS

The post SELF ALIGNING BEARINGS appeared first on Bearing Brokers Inc..

]]> PILLOW BLOCK BEARINGS https://bearingbrokersinc.com/2016/01/09/pillow-block-bearings/ Sun, 10 Jan 2016 01:52:50 +0000 http://bearingbrokersinc.com/?p=352 Pillow blocks are housings which have a bearing fitted into them. Pillow blocks are usually mounted in cleaner environments and generally are meant for lesser loads of general industry. These differ from “plummer blocks” which are bearing housings supplied without any bearings and are usually meant for higher load ratings and corrosive industrial environments. The […]

The post PILLOW BLOCK BEARINGS appeared first on Bearing Brokers Inc..

]]> Pillow blocks are housings which have a bearing fitted into them. Pillow blocks are usually mounted in cleaner environments and generally are meant for lesser loads of general industry. These differ from “plummer blocks” which are bearing housings supplied without any bearings and are usually meant for higher load ratings and corrosive industrial environments. The terms pillow block and plummer block are used interchangeably in certain parts of the world.

The fundamental application of both types is the same which is to mount bearings safely enabling their outer ring to be stationary while allowing rotation of the inner ring. The housing is bolted to a foundation through the holes in the base. Bearing housings are either split type or unsplit type. Split type housings are usually two piece housings where the cap and base can be detached, while certain series are one single piece housings.

Various seals are provided to prevent dust and other contaminants from entering the housing. Thus the housing provides a clean environment for the expensive bearings to freely rotate, hence increasing their performance and duty cycle.

Bearing housings are usually made of grey cast iron. However various grades of metals can be used to manufacture the same.

INDUSTRIES

APPLICATIONS

MANUFACTURERS

 

The post PILLOW BLOCK BEARINGS appeared first on Bearing Brokers Inc..

]]> SLEWING BEARINGS https://bearingbrokersinc.com/2016/01/09/slewing-bearings/ Sun, 10 Jan 2016 01:46:55 +0000 http://bearingbrokersinc.com/?p=346 Slewing bearings are used when in a machine one structural part needs to rotate in the opposite direction to another along a fixed axis, while guaranteeing the axial and radial link between the two parts. Slewing bearings often use two rows of rolling elements. They often use three race elements, such as an inner ring […]

The post SLEWING BEARINGS appeared first on Bearing Brokers Inc..

]]> Slewing bearings are used when in a machine one structural part needs to rotate in the opposite direction to another along a fixed axis, while guaranteeing the axial and radial link between the two parts.

Slewing bearings often use two rows of rolling elements. They often use three race elements, such as an inner ring and two outer ring “halves” that clamp together axially.

Slewing bearings are often made with gear teeth integral with the inner or outer race, used to drive the platform relative to the base.

INDUSTRIES

  • Aerospace
  • Automotive
  • Forestry
  • Manufacturing
  • Medical
  • Military
  • Marine
  • Power
  • Robotics
  • Surveillance

APPLICATIONS

  • Excavators
  • Concrete pumps
  • Boom and man lifts
  • Crane trucks
  • Cranes
  • Compactors
  • Wind turbines
  • Radars
  • Filling carousels
  • Rotary tables

MANUFACTURERS

 

The post SLEWING BEARINGS appeared first on Bearing Brokers Inc..

]]> RADIAL BEARINGS https://bearingbrokersinc.com/2016/01/08/radial-bearings/ Fri, 08 Jan 2016 05:01:51 +0000 http://bearingbrokersinc.com/?p=268 Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation. Single-row, Deep Groove Radial Ball Bearings These are the most […]

The post RADIAL BEARINGS appeared first on Bearing Brokers Inc..

]]> Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

Single-row, Deep Groove Radial Ball Bearings

These are the most common bearing type with a wide range of applications. Radial bearings are made with very high levels of precision and used in applications where rotational performance and low torque is necessary, but load is a secondary issue. Deep-groove bearings however do have higher load ratings for their size than shallow-groove ball bearings, but are also less tolerant of misalignment.

Ceramic Hybrid Ball Bearings

Ceramic hybrid ball bearings use ceramic balls in place of steel balls and are constructed with steel inner and outer rings. Using ceramic balls that can weigh up to 40% less than steel balls these bearings reduce centrifugal loading and skidding. This allows hybrid ceramic bearings to operate up to 50% faster than conventional metal bearings. The lighter balls in this type of assembly allow the bearing to spin faster, using less energy to maintain speed.

INDUSTRIES

Radial ball bearings are engineered for use in high-speed, high precision applications for:

  • Agriculture
  • Automotive
  • Chemical
  • General industrial
  • Utilities

APPLICATIONS

  • High-speed machining and grinding spindles
  • High-speed milling machines
  • Precision instruments
  • Pumps and compressors
  • Biotechnology equipment
  • Aircraft generators

MANUFACTURERS

AMI | DODGE | EZO | FAFNIR | FAG | FSQ | HEIM | HYATT | IJK | IKO | INA | JAF | KBC | KOYO | KSK | KYK | LINK-BELT | MCGILL | MRC | NACHI | NEW DEPATURE | NHBB | NICE | NMB | NSK | NTN | RBC | REX | ROLLWAY | SEALMASTER | SKF | SMT | SNR | STEYR | TIMKEN | TORRINGTON | TVTN | URB | ZKL | ZWZ

The post RADIAL BEARINGS appeared first on Bearing Brokers Inc..

]]> THIN SECTION BEARINGS https://bearingbrokersinc.com/2016/01/07/thin-section-bearings/ https://bearingbrokersinc.com/2016/01/07/thin-section-bearings/#respond Fri, 08 Jan 2016 04:40:11 +0000 http://bearingbrokersinc.com/?p=261 Metal Shielded Thin Section Ball Bearings: One of the most commonly used bearings, these types are manufactured with metal shields inserted into the outer raceway, these fit in closely to the inner race providing protection against light mechanical damage, some protection against the ingress of moisture, dust and other foreign matter and serve to retain […]

The post THIN SECTION BEARINGS appeared first on Bearing Brokers Inc..

]]> Metal Shielded Thin Section Ball Bearings: One of the most commonly used bearings, these types are manufactured with metal shields inserted into the outer raceway, these fit in closely to the inner race providing protection against light mechanical damage, some protection against the ingress of moisture, dust and other foreign matter and serve to retain the pre-filled grease in the bearing.

Shields can be easily removed for applications that only require 1 shield.

Benefits: Provides light mechanical protection, limits moisture and dirt ingress, lubricated for life, cost effective solution

INDUSTRIES

APPLICATIONS

MANUFACTURERS

FAFNIR | AG | FSQ | HEIM | HYATT | IJK | IKO | INA | JAF | KBC | KOYO | KSK | KYK | LINK-BELT | MCGILL | MRC | NACHI | NEW DEPARTURE | NHBB | NICE | NMB | NSK | NTN | RBC | REX | ROLLWAY | SEALMASTER | SKF | SMT | SNR | STEYR | TIMKEN | TORRINGTON

The post THIN SECTION BEARINGS appeared first on Bearing Brokers Inc..

]]> https://bearingbrokersinc.com/2016/01/07/thin-section-bearings/feed/ 0 CYLINDRICAL THRUST BEARINGS https://bearingbrokersinc.com/2016/01/07/cylindrical-thrust-bearings/ Thu, 07 Jan 2016 22:00:07 +0000 http://bearingbrokersinc.com/?p=229 Cylindrical thrust bearings are available in single-row with various variations including NU, N, NJ, NF, NP, and NUP. RIU, RU Type Features one-row of cylindrical bearings with a separable inner ring with a cage and roller complement mounted to the outer ring. RIN, RN Type This cylindrical bearing consists of two integral ribs on the […]

The post CYLINDRICAL THRUST BEARINGS appeared first on Bearing Brokers Inc..

]]> Cylindrical thrust bearings are available in single-row with various variations including NU, N, NJ, NF, NP, and NUP.

RIU, RU Type

Features one-row of cylindrical bearings with a separable inner ring with a cage and roller complement mounted to the outer ring.

RIN, RN Type

This cylindrical bearing consists of two integral ribs on the inner ring that retain the rollers and cage.

RIJ, RJ Type

These bearings support heavy radial loads and have the ability to carry light, unidirectional thrust loads that are up to 10 percent of the radial load. Features two integral ribs on the outer ring and a single rib on the inner ring.

RIF, RF Type

Able to carry incidental thrust loads, this bearing type features two integral ribs on the inner ring and a single rib on the outer ring.

RIT, RT Type

This bearing type can carry light thrust loads in both directions and may be used with a type RN or RU to accommodate axial expansion and contraction. It has two integral ribs on the outer ring, one integral rib on the inner ring.

RIP, RP Type

Able to carry incidental thrust loads in both directions this type may be used with a type RN or RU to accommodate axial expansion and contraction. The design has two integral ribs on the inner ring, one integral rib on the outer ring.

INDUSTRIES

APPLICATIONS

MANUFACTURERS

 

The post CYLINDRICAL THRUST BEARINGS appeared first on Bearing Brokers Inc..

]]>